High Wear Slide Bearing
  • Made from Nylon 6.6, Aramid fibre, PFTE
  • Extremly high wear resistance
  • Suitable for soft shafts (stainless steel, ALU, plastic)
  • Minimum wear of friction surface
  • Suitable for DIN h6-H7
  • Technical table and fitting instructions at page 62

  •  

Damper
Series 078
  • For controlled movement of flaps, box panels, appliance doors, etc
  • Product improvement by a soundless movement with a silicon damper
  • Simple and time saving assembly
  • Available in 8 torques
  • No maintenance needed
  • A: torque, B: module C: Nr of Theet
  • D: pitch circle Ø ; E: External Ø
Bidirectional Rotary Damper
  • Made from POM, Nylon 66, PC, Silicone, Silicon oil
  • Clip base damper for snap mounting
  • Damping torque 20rpm at 20°C
  • Temperature range: -40 +90°C
  • Lifetime 100,000 cycles
  • A: Torque, B: Module, C: Nr of Theet
  • D: Pitch Circle Ø wheel, E: External Ø wheel
Bidirectional Rotary Damper
  • Made from POM, Nylon 66, PC, Silicone, Silicon oil
  • Clip mounting base with external collar for pressure mounting
  • Damping torque 20rpm at 20°C
  • Temperature range: -40 +90°C
  • Lifetime 100,000 cycles
  • A: Torque, B: Module, C: Nr of Theet
  • D: Pitch Circle Ø wheel, E: External Ø wheel
Bidirectional Rotary Damper
  • Made from POM, Nylon 66, PC, Silicone, Silicon oil
  • Reverse clip base for snap mounting
  • Damping torque 20rpm at 20°C
  • Temperature range: -40 +90°C
  • Lifetime 100,000 cycles
  • A: Torque, B: Module, C: Nr of Theet
  • D: Pitch Circle Ø wheel, E: External Ø wheel
Bidirectional Rotary Damper
  • Made from POM, Nylon 66, PC, Silicone, Silicon oil
  • Big clip base damper for snap mounting
  • Damping torque 20rpm at 20°C
  • Temperature range: -40 +90°C
  • Lifetime 100,000 cycles
  • A: Torque, B: Module, C: Nr of Theet
  • D: Pitch Circle Ø wheel, E: External Ø wheel
High Wear Slide Bearing
  • High performance composite: Nylon 6.6 , Aramid fibre, PFTE
  • Extremly high wear resistance
  • Suitable for soft shafts (stainless steel, ALU, plastic)
  • Minimal wear of friction surface
  • Low coefficient of friction
  • Suitable for DIN h6-H7
  • Technical table and fitting instructions at page 62
Gear wheel
Series 104
  • Made from POM
  • Colour: natural
  • Usable up to 95°C
  • Available in modules 0.5 , 1 , 1.5 and 2
  • A: module, B: nr of teeth

  •  


     

Gear Wheels
Series 104-1
  • Made from POM
  • Colour: black
  • A: nr of teeth
  • B: pitch Ø; C:External Ø
  • D: pitch circle Ø; E: height
  • Suitable for series: 078-1; 078-2; 078-3; 078-4

  •  

Smoothed teeth Gear Wheel
  • Made from POM
  • Colour: black
  • A: nr of smoothed teeth
  • B: pitch Ø; C:External Ø
  • D: pitch circle Ø; E: height
  • Suitable for series: 078-1; 078-2; 078-3; 078-4

  •  

Gear Wheels
Series 104-3
  • Made from POM
  • Colour: black
  • A: nr of teeth
  • B: pitch Ø; C:External Ø
  • D: pitch circle Ø; E: height
  • Suitable for series: 078-1; 078-2; 078-3; 078-4

  •  

Gear Wheel with/without disc
  • Made from POM
  • Colour: black
  • A: nr of teeth
  • B: pitch Ø; C:External Ø
  • D: pitch circle Ø; E: height
  • Suitable for series: 078-1; 078-2; 078-3; 078-4
  • F1: with disc
Gear Wheel
Series 104-5
  • Made from POM
  • Colour: black
  • A: nr of teeth
  • B: pitch Ø; C:External Ø
  • D: pitch circle Ø; E: height
  • Suitable for series: 078-1; 078-2; 078-3; 078-4

  •  

Gear Wheel
Series 104-6
  • Made from POM
  • Colour: black
  • A: nr of teeth
  • B: pitch Ø; C:External Ø
  • D: pitch circle Ø; E: height
  • Suitable for series: 078-1; 078-2; 078-3; 078-4

  •  

Gear Wheel
Series 104-7
  • Made from POM
  • Colour: white
  • A: nr of teeth
  • B: pitch Ø; C:External Ø
  • Suitable for series 078-5

  •