2012/2013

	Round PVC Spacer Series 005-2
	Made from PVC Colour: light grey For electronics, electrical systems, etc Flammability: UL 94 V-0 Temperature range: 0 +50°C D: for screw thread size

	Slide bearing Series 008
	Made from nylon-66 (PA-66) Colour: natural and black Suitable for DIN h6-H7 fitting Bearing clearance about 1 % of the shaft diameter after assembly Also available in assortment box 019 Technical table and fitting instructions at page 62

	High Wear Slide Bearing Series 008-4
	Made from Nylon 6.6, Aramid fibre, PFTE Extremly high wear resistance Suitable for soft shafts (stainless steel, ALU, plastic) Minimum wear of friction surface Suitable for DIN h6-H7 Technical table and fitting instructions at page 62

	Hexagonal nut Series 051-1
	Made from Polypropylene (PP) Temperature resistance: -25°C +110°C Excellent electrical insulating properties Good resistance against acids Polypropylene can be welded Refer to standard ISO 4032, DIN 934 for guidance purposes

	Damper Series 078
	For controlled movement of flaps, box panels, appliance doors, etc Product improvement by a soundless movement with a silicon damper Simple and time saving assembly Available in 8 torques No maintenance needed A: torque, B: module C: Nr of Theet D: pitch circle Ø ; E: External Ø

	Gas Cylinder Valve Protectors Series 088
	Made from Polyethylene (Ld-PE) Colour: yellow Developed in conjunction with major European gas companies Protect industrial gas valves from ingress of dust and dirt Unique vent flap for safe release of gas following accidental opening

	High Wear Slide Bearing Series 103-3
	High performance composite: Nylon 6.6 , Aramid fibre, PFTE Extremly high wear resistance Suitable for soft shafts (stainless steel, ALU, plastic) Minimal wear of friction surface Low coefficient of friction Suitable for DIN h6-H7 Technical table and fitting instructions at page 62

	Gear wheel Series 104
	Made from POM Colour: natural Usable up to 95°C Available in modules 0.5 , 1 , 1.5 and 2 A: module, B: nr of teeth

	Micro Low Voltage Insulator Series 125
	Made from Nylon 6, Insert in Brass Colour: natural Voltage breakdown » 11,000 volts/mm Temperature range: -40, +105°C

	PEEK® Pan Head Screw Series 180
	Made from PEEK® Heat resistant up to 180°C Excellent mechanical strenght and stiffness Excellent resistance to alternating tensile and bending loads Excellent dimensional stability Flame resistance: UL94 V0 Check our PEEK products: 180 ~188

	PEEK® socket low head torx screw Series 187
	Made from PEEK® Heat resistant up to 180°C Excellent mechanical strength and stiffness Excellent resistance to alternating tensile and bending loads Excellent dimensional stability E: torx nr; F: Pitch Check our Peek products: 180 ~ 188

	PEEK® socket head torx screw Series 187-1
	Made from PEEK® Heat resistant up to 180°C Excellent mechanical strength and stiffness Excellent resistance to alternating tensile and bending loads Excellent dimensional stability E: torx nr; F: Pitch Check our Peek products: 180 ~ 188

	PEEK® hexagonal socket set screw Series 188
	Made from PEEK® Heat resistant up to 180°C Excellent mechanical strength and stiffness Excellent resistance to alternating tensile and bending loads Excellent dimensional stability Flame resistance: UL94 VO Check our Peek products: 180 ~ 188

	Aluminium Cable Clamp Series 289
	Made from Aluminium Colour: Silver To hold cables, tubes and pipes Screw fixing hole Ø 5.2 mm

	Dual Lock PCB Spacer Series 291
	Made from Nylon 6.6 Colour: Natural Snap-lock in a Ø 3.2 mm top and bottom hole Panel thickness 1.57 mm MAX Flame resistance: UL94 V2

	Barbed blind hole fastener Series 292
	Made from Nylon 6.6 Colour: Black Hole size: F1=4.75, F2=6.35, F3=7.14 Flame resistance: UL94 V2

	Pawl Lock Rivet Series 293
	Made from Nylon 6.6 Colour: Natural For use in threaded, non threaded, drilled or punched hole Hole size: F1=6.35, F2 =5.5 Flame resistance: UL94 V2

	Push PCB Spacer Series 294
	Made from Nylon 6.6 Colour: Natural Bottom hole snap-lock in a Ø 2.5 mm hole Panel thickness 1.6 mm MAX Flame resistance: UL94 V2

	Micro Wire Saddle Series 296
	Made from Nylon 6.6 Colour: Natural E = Hole Diameter F = Panel thickness Flame resistance: UL94 V2

	Stand-off Twist Lock Series 297
	Made from Nylon 6.6 Colour: Natural E: hole Ø mm Panel thickness: 0.8 ~ 2.0 Flame resistance: UL94 V2

	Push-in Cable Clamp Series 307
	Made from Nylon 6.6 Colour: Gray Snap-lock in a Ø 4.8 mm hole Flame resistance: UL94 V2

	Hexagonal M/M Spacer Series 313
	Made from Nylon 6.6 Colour: black Mostly used in electronic applications Temperature range: -40 +110°C

	Ezeplugs Series 464
	Made from Polyethylene (Ld-PE) Colour: red Simple push fit, with lateral pull For thread size A: metric, B: UNF, C:BSP Strong and flexible

	Protection Plugs Series 476-1
	Made from Polyethylene (Ld-PE) Colour: red Threaded protection plug Fit extensive range of threaded applications with easy to grip head Excellent protection from dirt, moisture and corrosion D x E = Thread (BSP/Gas)

	Grommet Feet Series 496
	Made from PVC Colour: black Ideal for housing and cases Easy to fit; simply push into punched or drilled holes

	End Tips Series 529
	Made from PVC Colour: White or black Add protection or a neat finish to a wide range of applications F1 = Round head, F2 = Flat head

	Chrome Plated Round Inserts Series 531
	Made from Polyethylene (Ld-PE), chrome plated Colour base: black Ribbed for easy fitting Provides protection of tubular products and gives an attractive finish D = wall thickness

	Hexagonal Head Screws Series 544
	Made from Polypropylene (PP) Temperature resistance: -25 +110 C Excellent electrical insulating properties Good resistance against acids Polypropylene can be welded Refer to standard ISO 4017, DIN 933 for guidance purposes

	Heavy Duty Ferrules Series 554
	Made from PVC Colour: black Thick base gives extra protection Provides protection to tubular products

	Threaded Inserts Series 566
	Made from Polyethylene (Hd-PE) Colour: black Suitable for wall thickness of 1.0 ~2.0 mm

	Knurled conical nut Series 570
	Made from Nylon 6.6 Colour: Natural

	UV Resistant Cable Ties Series 575
	Made from Nylon 6.6 Colour: Black UV resistant C: MAX cable diameter

	Marker Cable Ties Series 576
	Made from Nylon 6.6 Colour: Natural With identification tag C: Tag size D: MAX cable diameter E: Tensile LBS/Kg

	Lateral Pull Plug Series 580
	Made from Thermoplastic rubber Colour: black Temperature resistance: -40°C +135°C Resistant to acids Protect threaded or plain components Handy pull-tab for easy removal E: thread size

	Slotted Countersunk Screw Series 585
	Made from PVDF Temperature resistance up to 150°C High mechanical strength and toughness Excellent resistance against chemicals and gasses Very low moisture absorption ensures good weather resistance Refer to standard ISO2009, DIN 963 for guidance purposes Flame resistance: UL94 VO