Made from PVC Colour: light grey For electronics, electrical systems, etc... Flammability: UL 94 V-0 Temperature range: 0 +50°C D: for screw thread size

Tillverkade av självsmörjande nylon-66. Okänsliga för smuts, väderleksförhållanden och de flesta kemikalier. Mycket lämpad för ljudlösa gångjärn, maskiner med lågt varvtal. Isolerar även elektriskt mellan axel och lagerhus. Lämpad för passning enligt DIN h6-H7. Lagrets spelrum efter montering ca. 1% av axelns diameter. Även tillgänglig i sortiment låda (grupp 019)

Made from Nylon 6.6, Aramid fibre, PFTE Extremly high wear resistance Suitable for soft shafts (stainless steel, ALU, plastic) Minimum wear of friction surface Suitable for DIN h6-H7 Technical table and fitting instructions at page 62

Made from Polypropylene (PP) Temperature resistance: -25°C +110°C Excellent electrical insulating properties Good resistance against acids Polypropylene can be welded Refer to standard ISO 4032, DIN 934 for guidance purposes

För harmonisk och lugn förflyttning av klaffar, apparatdelar o.d. Förbättrad produkt som verkar ljudlöst med silikondämpare. Idealisk för konsumentapparater. Enkel tidssparande montering. Tillgänglig i 4 vridmoment. Underhållsfri.

Smart kassettklämma som hindrar videon från att skallra. Hindrar därför videon från att bli stulet från paketet. Tillverkad av röd PE. Mycket stark och låg i pris.

High performance composite: Nylon 6.6 , Aramid fibre, PFTE Extremly high wear resistance Suitable for soft shafts (stainless steel, ALU, plastic) Minimal wear of friction surface Low coefficient of friction Suitable for DIN h6-H7 Technical table and fitting instructions at page 62

För buller- och stötfri transmission. Kan användas till 95°C. Av 100% polyacetalplast (POM). Tillgängligt i moduler 0.5, 1, 1.5 och 2. Förrådsartikel, alltså direkt tillgänglig.

Made from Nylon 6, Insert in Brass Colour: natural Voltage breakdown » 11,000 volts/mm Temperature range: -40, +105°C

Made from PEEK® Heat resistant up to 180°C Excellent mechanical strenght and stiffness Excellent resistance to alternating tensile and bending loads Excellent dimensional stability Flame resistance: UL94 V0 Check our PEEK products: 180 ~188

Made from PEEK® Heat resistant up to 180°C Excellent mechanical strength and stiffness Excellent resistance to alternating tensile and bending loads Excellent dimensional stability E: torx nr; F: Pitch Check our Peek products: 180 ~ 188

Made from PEEK® Heat resistant up to 180°C Excellent mechanical strength and stiffness Excellent resistance to alternating tensile and bending loads Excellent dimensional stability E: torx nr; F: Pitch Check our Peek products: 180 ~ 188

Made from PEEK® Heat resistant up to 180°C Excellent mechanical strength and stiffness Excellent resistance to alternating tensile and bending loads Excellent dimensional stability Flame resistance: UL94 VO Check our Peek products: 180 ~ 188

Made from Aluminium Colour: Silver To hold cables, tubes and pipes Screw fixing hole Ø 5.2 mm

Made from Nylon 6.6 Colour: Natural Snap-lock in a Ø 3.2 mm top and bottom hole Panel thickness 1.57 mm MAX Flame resistance: UL94 V2

Made from Nylon 6.6 Colour: Black Hole size: F1=4.75, F2=6.35, F3=7.14 Flame resistance: UL94 V2

Made from Nylon 6.6 Colour: Natural For use in threaded, non threaded, drilled or punched hole Hole size: F1=6.35, F2 =5.5 Flame resistance: UL94 V2

Made from Nylon 6.6 Colour: Natural Bottom hole snap-lock in a Ø 2.5 mm hole Panel thickness 1.6 mm MAX Flame resistance: UL94 V2

Made from Nylon 6.6 Colour: Natural E = Hole Diameter F = Panel thickness Flame resistance: UL94 V2

Made from Nylon 6.6 Colour: Natural E: hole Ø mm Panel thickness: 0.8 ~ 2.0 Flame resistance: UL94 V2

Made from Nylon 6.6 Colour: Gray Snap-lock in a Ø 4.8 mm hole Flame resistance: UL94 V2

Made from Nylon 6.6 Colour: black Mostly used in electronic applications Temperature range: -40 +110°C

Made from Polyethylene (Ld-PE) Colour: red Simple push fit, with lateral pull For thread size A: metric, B: UNF, C:BSP Strong and flexible

Made from Polyethylene (Ld-PE) Colour: red Threaded protection plug Fit extensive range of threaded applications with easy to grip head Excellent protection from dirt, moisture and corrosion D x E = Thread (BSP/Gas)

Made from PVC Colour: black Ideal for housing and cases Easy to fit; simply push into punched or drilled holes

Made from PVC Colour: White or black Add protection or a neat finish to a wide range of applications F1 = Round head, F2 = Flat head

Made from Polyethylene (Ld-PE), chrome plated Colour base: black Ribbed for easy fitting Provides protection of tubular products and gives an attractive finish D = wall thickness

Made from Polypropylene (PP) Temperature resistance: -25 +110 C Excellent electrical insulating properties Good resistance against acids Polypropylene can be welded Refer to standard ISO 4017, DIN 933 for guidance purposes

Made from PVC Colour: black Thick base gives extra protection Provides protection to tubular products

Made from Polyethylene (Hd-PE) Colour: black Suitable for wall thickness of 1.0 ~2.0 mm

Made from Nylon 6.6 Colour: Natural

Made from Nylon 6.6 Colour: Black UV resistant C: MAX cable diameter

Made from Nylon 6.6 Colour: Natural With identification tag C: Tag size D: MAX cable diameter E: Tensile LBS/Kg

Made from Thermoplastic rubber Colour: black Temperature resistance: -40°C +135°C Resistant to acids Protect threaded or plain components Handy pull-tab for easy removal E: thread size

Made from PVDF Temperature resistance up to 150°C High mechanical strength and toughness Excellent resistance against chemicals and gasses Very low moisture absorption ensures good weather resistance Refer to standard ISO2009, DIN 963 for guidance purposes Flame resistance: UL94 VO